ADwin-Gold
Hardware Manual, Version 2.3
13
ADwin
Power Supply
The power supply connection of the
ADwin-Gold
with 12 V (see Annex,
„Technical Data“), is made via the built-in connector, at left next to the power
switch or above the GND socket (see picture 5-1). Connect there the 3-pin
subminiature connector. For the pin assignment see the following picture:
If you operate the
ADwin-Gold
together with a PC, the system can get its
power supply by using the power-connector of the link adapter.
For using the system with an external power supply unit you need the subminia-
ture connector described above of the series 712, with the article number:
2 99-0406-00-03. The connector is provided by
Franz Binder GmbH + Co. elektrische Bauelemente KG
Rötelstrasse 27
D-74172 Neckarsulm
Tel.: +49 - 7132 - 325 -0
www.binder-connector.de
When using the system with a notebook, power has to be supplied by a sepa-
rate power supply. Please pay attention to the fact that it is sufficiently
dimensioned.
+9...18V
PE
GND
1
2
3
Figure 5-2: Power supply connector (male)
Power Supply
