1 0 9 1 5 9
1 0 9 1 5 9
Single Lever Kitchen Faucet
9
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
ROUGHING-IN DIMENSIONS
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
Tubing Cutter
Regular Screwdriver
Basin Wrench
Turn off hot and cold water supplies before beginning.
CAUTION
1
INSTALL FITTING WITH OR WITHOUT ESCUTCHEON PLATE
If using the optional ESCUTCHEON PLATE (1) make sure the
O-RING (2) is against the sink and the ESCUTCHEON PLATE
ADAPTER (3) is under the ESCUTCHEON PLATE (1). Use
ESCUTCHEON MOUNTING KIT (4) to secure ESCUTCHEON
PLATE (1) to mounting surface. Mount Faucet onto ESCUTCHEON
PLATE (1) as detailed below.
O-RING (6) should be installed into bottom of ESCUTCHEON BASE (5).
Install the ESCUTCHEON BASE (5) over the SUPPLY ADAPTERS (14)
and the SPRAY HOSE ADAPTER (13).
Install the FAUCET into it's mounting hole in the sink, counter top or
ESCUTCHEON PLATE (1).
Assemble the two BRASS SCREWS (7) into the RETAINING LOCKNUT (8).
Assemble SUPPORT PLATE (9) with collar facing down onto SPOUT
SHANK (12). Assemble RUBBER WASHER (10) BRASS WASHER (11)
RETAINING LOCKNUT (8) onto FAUCET SHANK (12) from underside of
sink or countertop.
Align and center FAUCET. Tighten LOCKNUT (8) on SHANK (12).
Tighten the two BRASS SCREWS (7) to secure FAUCET to mounting
surface.
6
12
10
11
11
10
7
14
5
4
10" ESCUTCHEON
PLATE KIT
1
2
3
8
13
BLUE
RED
Connect the HOT water supply line to FLEXIBLE SUPPLY marked
with a
Red
tag. Connect the COLD water supply line to FLEXIBLE
SUPPLY marked with a
Blue
tag.
2b
FERRULE
SUPPLY STOPS
PUTTY
HOT
COLD
WATER SUPPLY CONNECTIONS
2a
INSTALL HOSE AND SPRAY (Model 825/860/...)
Use 1/2" IPS FLEXIBLE SUPPLIES (10) or 3/8" O.D.
BULL-NOSE RISERS (11). Use adjustable wrench to tighten
connections. Do not over tighten. Be careful not to kink
copper supply when bending. Use tubing cutter to cut to
proper length.
2
RED
BLUE
Apply a bead of putty to the underside lip of SPRAY HOLDER (1).
Place the SPRAY HOLDER (1) into the appropriate mounting hole.
Assemble the RUBBER WASHER (2), BRASS WASHER (3) and
LOCK NUT (4) onto the shank of SPRAY HOLDER (1). From
below tighten LOCK NUT (4) to secure SPRAY HOLDER (1).
Remove RUBBER WASHER (5) and FIBER WASHER (6)
FROM SPRAY HOSE (7). Feed the small end of the
SPRAY HOSE (7) through the SPRAY HOLDER (1).
Install the FIBER WASHER (6) into the coupling nut of
the spray connection on faucet. Tighten with two
wrenches to make a water tight connection.
Install the RUBBER WASHER (5) into the coupling for
the HAND SPRAY (8) and hand tighten. Place the HAND
SPRAY (8) into the Spray holder (1).
INSTALL SPRAY HOLDER (Model 825/860/...)
1
4
5
8
2
3
4
6
12
13
With HAND SPRAY seated in HOLDER, install WEIGHT (12)
onto HOSE (4) using two SCREWS (13). Locate the WEIGHT
(12) two feet (2') from the underside of the sink deck. Tighten
SCREWS (13) firmly to secure WEIGHT (12) to HOSE (4).
8-1/8"
6"
7"
6-1/4"
xx"
xx"
1-1/4"
2"
8"
FAUCET SUPPLIES
SPRAY HOSE
1"D.
1-1/4" D.
NOTE: Bore hole
size is 1-3/8"