Product Installation Guide
Zen Ice Solo
Contents
The required hole diameter is 32 mm. Can be installed onto a sink/ countertop up to 50 mm thick.
Distance between centres - tap base to spout is 140 mm. Ensure this meets installation requirements.
Product code: ICESOLO
v19.11.2
The o- ring sits in a groove on the underside of the
tap and is to be positioned on top of the mounting
surface, the metal washer and retaining nut go on
the underside.
Insert the grey ¼” to ¼” push fit connector onto
the stem of the tap until a full stop is reached, pull
back the fitting to test for a solid connection and
then insert the locking collar to prevent future
inadvertent removal.
1
2
Installation Steps
Provides filtered cold (ambient) water when connected directly to the mains supply.
Provides filtered cold (chilled) water when installed with an undersink chiller (supplied separately).
