Jadak PHOTO RESEARCH A-TAKT V-7HS, Руководство пользователя

Страница: 35 / 47

Chapter 5
– Software
31
Int32 PR6xxComm.CommBase.prDeviceExposure (int mSecs)
Set exposure time for subsequent measurements.
Parameters:
mSecs Exposure time in milliseconds. If the argument is zero the instrument will run in
adaptive mode.
Returns:
A Int32 instrument operation result code: 0 = success, negative number is error code
Int32 PR6xxComm.CommBase.prDeviceFirmwareVersion (ref string
szFirmwareVersion)
prDeviceFirmwareVersion Gets the firmware version of the currently opened PRI spectral device
Parameters:
szFirmwareVersion Firmware version identification string
Returns:
A Int32 instrument operation result code: 0 = success, negative number is error code
Int32 PR6xxComm.CommBase.prDeviceGetFrequency (ref Int16 synchFrequency)
prDeviceGetFrequency Retrieves the synch frequency detected by the last luminance measurement.
Returns:
A Int32 instrument operation result code: 0 = success, negative number is error code
Parameters:
synchFrequency The parameter is a passed by reference 16 bit integer. Upon successful
completion of the method the parameter will contain the synch frequency in
hertz.
See Also:
System.Int16
Int32 PR6xxComm.CommBase.prDeviceGetMinExposure (ref Int32 minExposure)
Get instrument minimum exposure time.
Parameters:
minExposure The parameter is a passed by reference 32 bit integer. Upon successful
completion of the method the parameter will contain the minimum supported
instrument exposure time in microseconds.
Returns:
A Int32 instrument operation result code: 0 = success, negative number is error code