Jadak PHOTO RESEARCH A-TAKT V-7HS, Руководство пользователя

Страница: 32 / 47

Chapter 5
– Software
28
Int32 prDeviceSpectralMeasure (ref string spectralData)
Take spectral measurement
Int32 prDeviceGetTakt (ref int Takt1, ref int Takt2, ref int Takt3, ref int Takt4)
Get previously configured TAKT table values. (These are saved in the SDK)
Int32 prDeviceTaktTable (int Takt1, int Takt2, int Takt3, int Takt4)
Set TAKT table using user provided values.
Int32 prDeviceTaktIndex (int index)
Set TAKT table index for previously applied TAKT table.
Int32 prDeviceUserCorrelationTable (string table, ref double brightness, ref double
cieX, ref double cieY)
Provide instrument with user specified spectral correlation table. This table must be applied while the
instrument is measuring the same light source used to generate the table. The application measurement
will be executed as part of this procedure.
Int32 prDeviceEnableCorrelationTable (bool bTurnOn)
Enable (/disable) correlation table loaded with previous method.
Int32 prDeviceStartCamera (string viewerPath)
Launch instrument viewing camera application.
Int32 prDeviceStopCamera ()
Kill instrument viewing camera application.
int prUpdateFirmware (string FWFile)
Load new firmware image on to the instrument. Both the new image and the current image checked to
insure that the load will succeed.
Int32 prDeviceGetMinExposure (ref Int32 minExposure)
Get instrument minimum exposure time
Int32 prDeviceGetFrequency (ref Int16 synchFrequency)
prDeviceGetFrequency retrieves the synch frequency detected by the last luminance measurement.
Int32 prDeviceSetFrequency (Int16 synchFrequency)
prDeviceSetFrequency sets the synch frequency for subsequent luminance measurements.
Int32 prDeviceSetSynchMode (SynchMode synchMode)
prDeviceSetSynchMode sets the synch frequency for subsequent luminance measurements.
Int32 prDeviceLearnFreqAdjustedTakt (TaktLearnPhases learnP hase, int frequency)
Interactive method to use when determining takt table values for customer target. Each phase or pass
requires that the DUT be set to a specified luminance/color level. Upon completion of all the required phases
a takt table is generated and applied to the instrument.