background image

PROBABLE CAUSE

REMEDY

PROBLEM

19

TROUBLESHOOTING GUIDE

F. Improper or defective wiring.
G. High temperature safety
     switches tripped.

H. Subnormal voltage.

I. Locked shaft or impeller.
J. Motor windings burned out.
K. Defective starting switch
     inside motor.

F.  *
G. Reset buttons on heater after
     water has cooled; see *Note
     if switches continue to trip.
H. Call an electrician or your
    power company.
I.  *
J. *
K. *

10. Motor will not start.
     
(Continued)

11. Motor stops.

A. Motor overload condition.

B. Selector switch failure.
C. Relay failure.
D. Inadequate supply wiring.

E. High temperature safety
     switches tripped.

A. Let cool for one hour.
     Motor overload protector will reset;
     if problem persists, see *Note.
B. *
C. *
D. Consult electrician to cor-
     rect wiring to unit.
E. Reset buttons on heater after
    water has cooled; see *Note
    if switches continue to trip.

12. Air Blower does not operate.

A. Power off.

B. ACC switch in OFF.
C. House circuit breaker
     tripped, no power to
     system.
D. ELCB tripped.
E. Faulty motor.

A. Turn on power at service
     panel.
B. Select other function.
C. Reset circuit breaker.

D. Reset ELCB.
E. *

*Note:  The skills and tools necessary for the safe repair of this spa require the services
             of qualified service personnel.  Contact your Jacuzzi Whirlpool Bath dealer.

Содержание The Quantum Plus

























Отзывы: