Page 44
4. Gently rotate the larger (rear) valve body 1/3 turn counterclockwise
to unlock the drain valve.
5. Pull the larger (rear) body outward as shown
to open drain.
6. After the spa drains, perform steps 2-5 in
reverse order to close the drain prior to refilling
spa.
After refilling, turn on power to the spa and follow
the steps listed under “Spa Fill Up Procedures.” (page 14). Always fill
your spa through both filter buckets.
12.3 Cleaning The Spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is refilled.
12.4 Pillow Care
Clean the four headrests in your spa as needed by wiping them with a
clean cloth or soft brush saturated with detergent soap. It is not neces-
sary to remove the headrests for cleaning.
To remove headrests for long term storage or replacement, grasp both
ends of each headrest and gently pull inward towards the center of the
spa. To reinstall, over mounting strip and press down until headrest
mounting bracket emits a “click” sound. Then adjust headrest height by
simply moving up or down as desired.
12.5 Maintaining The Synthetic Cabinet
The synthetic cabinet requires little or no maintenance of any kind. To
clean, simply wipe cabinet with a clean towel and mild detergent soap
solution.
Open Drain
4.
5.
Unlock
Drain
Open Drain
4.
5.
Unlock
Drain
