background image

Page 24

9.0  Operating Instructions

Your Jacuzzi® spa has a touch-sensitive control panel, massage selec-

tors, and air control knobs located on the top rim of the spa (page 20-23).  

These controls let you operate many of the special functions of your 
Jacuzzi spa.  By familiarizing yourself with the following information, you 

will be able to gain the full benefit from using your spa .

9.1  View Button

Pressing this button inverts the main four-digit display on the 

command center’s LCD screen to allow easy reading from either 

inside or outside the spa.

9.2  Activate Jets Pump 1

The button labeled JETS 1 controls jets pump #1. Pressing this 
button cycles jets pump #1 on and off.

9.3  Activate Jets Pump 2

The button labeled JETS 2 controls jets pump #2. Pressing this 

button cycles pump #2 on and off.

Auto Turn Off 

— Anytime a pump has been manually turned on, it will 

automatically turn off after approximately 20 minutes. If at this time you 
desire more jet operation you may simply turn the pump(s) back on.

9.4  Selecting The Desired Massage Action

Your Jacuzzi spa  is equipped to allow you to customize 
the massage action you desire. Each model incorporates a 
massage selector that allow you to customize the mas-
sage and performance by diverting water between various 

jet systems. Simply turn massage selector to position A 
(Combo), B, or C to divert water pressure to various jet 

groups. 

Note: The massage selector valve(s) is designed 

to operate in positions A (Combo), B, and C for optimum 
performance. It is considered normal for sound levels 
within the valve to vary between positions due to the  large 

amounts of water flowing through it! For optimum filtration 
benefits, leave the valve in position A when spa  is cov

-

ered. Select position B or C for maximum jet performance 
during spa use.

B

C

A

B

C

A

Содержание J - 460













































































Отзывы: