Page 58
E. Adjusting Bass Level
Press audio button (20) until display reads “BAS.” Rotate volume knob
to desired setting. A display of “C O” indicates center, -2 to -12 indicates
bass cut, and +2 to +12 indicates bass boost. Note: unit returns to
volume mode if volume control is not rotated for 3 seconds.
F. Adjusting Treble Level
Press audio button (20) until display reads “TRE.” Rotate volume knob
to desired setting. A display of “C O” indicates center, -2 to -12 indicates
treble cut, +2 to +12 indicates treble boost. Note: unit returns to volume
mode if volume control is not rotated for 3 seconds.
G. Adjusting Balance
Press the audio button (20) until display indicates “BAL.” Rotate
volume knob to desired setting. A display of “C O” indicates center, L1
to 15 indicates left balance, R1 to 15 indicates right balance. Note: unit
returns to volume mode if volume control is not rotated for 3 seconds.
19.2 Radio Operation
A. Adjust Fader
Press audio button (20) until display reads “FAD.” Rotate volume
knob to desired setting. A display of “C O” indicates center, “R” 1 to 15
indicates rear fade, “F” 1 to 15 indicates front fade. Note: unit returns to
volume mode if volume control is not rotated for 3 seconds.
B. Display Clock
Press set button (9) to toggle display between clock and radio modes.
When clock mode is selected, the current time displays whenever the
unit is left undisturbed.
C. Set Clock
Press and hold set button (9) for 2 seconds until first time digit flashes
on display. Use tune/seek-up button (13) or tune/seek-down button (14)
to set hour, noting AM/PM indicator at left. Briefly press set button a
second time to select minutes display. Press set button a third time to
complete procedure. Unit remains in clock mode and displays time after
3 seconds. Note: When power to spa is shut off for any reason, the
clock will be reset to 12:00 AM.
