45
Spa Fill Up Procedure
For best results, read each step in its entirety before pro-
ceeding with this procedure.
I
Prepare The Spa For Filling
- Clear all debris from the spa. (Although the spa shell has
been polished at the factory, you may want to treat it with a
specially formulated spa cleaner.)
Consult your authorized Jacuzzi dealer for additional infor-
mation prior to filling spa.
- Remove both ProClarity™ and ProClear™ Plus skimmer, pol-
ishing filter lids and filters as illustrated in Section “Cleaning
the Filter Cartridges”.
I
Fill Spa
Place the end of your garden hose into empty skimming fil-
ter bucket (filter bucket on your left) as you stand next to the
spa. Fill spa half way, then place the garden hose into the
opposite filter bucket (filter bucket on your right) while adding
the remaining fill water.
Fill until water covers all jets but does not touch the bottom
of the lowest headrest (DO NOT OVERFILL!).
CAUTION: TO DECREASE BUILD UP ON COMPONENTS AND
MINIMIZE ACRYLIC DAMAGE.
Never fill with water from a water softener. If your water is
extremely “hard,” it is preferable to fill half-way with hard water
and the rest of the way with softened water. Water that is too
soft can be corrosive to metal components.
IMPORTANT:
Always fill your spa through both filter buckets
after draining. Failure to do so may cause air to be trapped in
either pump, preventing the pump from circulating water.
Remove the hose and replace both filter cartridges as illus-
trated in Section “Cleaning the Filter Cartridges”.
I
Turn on Power
Activate the light using the relevant switch
(es)
.The heater and fil-
ter/recirculation pump are activated automatically.
If the screen displays either a “Cool Warning” or “Freeze Pro-
tection” error, this is normal. Normally, at the initial fill, the
water tends to be cold.
Refer to “Error/Display Messages” for additional information.
I
Activate Jets Pumps
Turn on jet pumps when adding chemicals (see Section “Acti-
vating the Jets Pumps” to activate jets).
NB: do not start the pump(s) if the water does not cover the highest
pump nozzles.
- Open all of the air controls and turn all of the massage selector k-
nobs to the central position.
I
Addition of chemcial additives at first start-up
Please refer to the Jacuzzi system water treatment guide and
relative catalogue for details on water quality maintenance,
the methods and warnings governing the use of relative
chemical products.
ATTENTION: read and follow all the instructions related
to the use and storage methods of chemical products, in
strict compliance with the manufacturer’s instructions pro-
vided on the packaging.
ATTENTION! Do not use trichlorine tablets! This can da-
mage the components of the hot tub and cause burning and
irritation to the skin and mucous membranes. The use of the-
se chemicals will void the manufacturer’s warranty.
WARNING!
Do not get in the spa until the quantity of disinfectant has
not dropped below the level recommended by the manu-
facturer and/or by your retailer.
Power
on
Lamp
on
DANGER!
TURN
P
OWER
OFF!
DO
NOT
LOOK
A
T
LIT
BULB.
SEVERE
EYE
DAMAGE
OR
BLINDNESS
CAN
OCCUR!
9
9
6
2
3
1
5
10
10
11
7
13
14
4
12
8
1
ProTouch™ Control Panel
2
ProTouch™ Control Box
3
Heater
4
Filter/Circulation Pump
5
Jets Pump
6
Jets Pump
7
CLEARRAY Water Purification System
8
QuickDrain™
9
Pump Drain Plugs(s)
10
Power Supply Entrance(s)
11
Spa Drain Valve
12
BLUEWAVE 2.0 Wireless Stereo (Optional)
13
Prolink™ Remote Monitoring System
Module (Optional)
14
LED Lights DCU unit
Содержание J-400 Series
Страница 2: ...Italiano Avvertenze 3 English Warnings 41 Fran ais Recommandations 77 Index...
Страница 40: ......
