36
Light Mode Button
This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
Press once
High-Speed Colour Blend Mode.
Press again
Low-Speed Colour Blend Mode.
Press again
Blocks slow-changing colour mix mode.
Press again
Blue
Press again
Purple
Press again
Red
Press again
Amber
Press again
Green
Press again
Teal
Press again
Teal
Press again
Quick-changing colour mix mode is reactivated, and so on.
Jets
The water flow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Some jets
offer an adjustable center nozzle that allows you to change the
water discharge angle. Simply tilt the center nozzle in these jets
to the desired angle to customize your personal massage. Other
jets offer a spiral action that produces a surging stream of air and
water that provides a vigorous massage.
Note:
Always keep at least 6 adjustable jets open at all times to en-
sure proper filtration characteristics within the spa.
Selecting Desired Massage Action
C
B
A
All models incorporate a massage selector valve that
allows you to customize the massage and performance by di-
verting water between various jet systems within the spa. Simply
turn valve to positions A, B or C to divert water pressure to vari-
ous jet groups.
Note:
The valve is intended to operate in positions A (Combo), B, or
C for optimum performance. It is considered normal for sound levels
within the valve to increase between these positions due to the large
amounts of water flowing through it. For optimum filtration bene-
fits, always leave this valve in position A when the spa is covered and
select positions B or C for maximum jet performance during spa use.
Waterfall Feature
Models: J-335/345/355/365/375/385
The waterfall is activated at the same time as the recirculation
pump; it can also be activated using the JETS 1
(
1
) or
CLEAR-
RAY™
(
) buttons.
Models: J-315/325
The waterfall is activated at the same time as pump 1.
A.
Push thumb wheel on top of waterfall to the left (while in spa)
to start or increase flow.
B.
Push thumb wheel on top of waterfall to the right (while in
spa) to slow or turn flow off.
NOTE:
When the waterfall is in the OFF position, some water may
still flow through. This is considered normal.
CLEARRAY on Demand
The CLEAR
RAY
on demand feature activates the water purifica-
tion system for a period of 1-hour. Press the button to turn the
system on. During this time the circulation pump and the CLEAR-
RAY
unit are on.
Note:
When the CLEAR
RAY
system is on, due to a programmed
or scheduled setting, the feature cannot be turned off.
Air Controls
Certain jet systems have their own “toggle” on/off air control.
Each control introduces air into the water lines that supply spe-
cific jet groups. Simply press any air control button Jacuzzi logo
side down to open or press the opposite side of button to close.
Note:
To minimize heat loss, close all air controls (Jacuzzi logo up)
when spa is not in use. Some jets may suck air even when closed.
Optional BLUEWAVE® Spa Stereo System
Spas equipped with the optional audio system offer enhanced
enjoyment. These models include a high-quality FM/USB/AUX/
Bluetooth stereo receiver with four high-quality marine speakers
for unsurpassed sound quality and long-life.
Note:
Digital rights management (DRM) files cannot be played. Per-
sonal files (MP3, WMA, iTunes or AAC) can be played as long as they
are not DRM encrypted files.
Blow-Out Cycle
This cycle will purge the air from the plumbing lines normally
caused by draining and filling the spa. The Jets Pump 1 and the
Circulation Pump will turn on for 1 minute and then shut off.
Then Jets Pump 2 will turn on and run for 1 minute then shut off.
This cycle will only occur at start up.
Содержание J-300 Series
Страница 2: ......
Страница 3: ...Italiano Avvertenze 4 English Warnings 28 Fran ais Recommandations 51...
Страница 79: ...79...