Jacuzzi Avalanche, Руководство пользователя и инструкция по установке

Страница: 13 / 23

Cleaning the D.E. grid cassette:
To avoid electrical shock, unplug the pump before performing
any service or maintenance.
If filter Ring-Lok is removed or adjusted under pressure, the
filter cover may blow off, causing injury or major property
damage.
Unplug the pump cord.
Step 1
For above-ground pools with the filter system located below the pool water level.
Your system is full of water. If you remove the pump strainer cover, water will run
out freely from your pool. You must close the shut-off valves, if installed, or make
provisions to stop the flow of water from your pool. To remove the water that is
still captured in your system, drain the filter tank before proceeding.
For in-ground pools with the filter system located above the pool water level.
Your system is full of water. If you open the filter air bleed valve or remove the
filter cover before draining the filter tank, dirty water may run back into
your pool.
Step 3
Unscrew the wiper handle and set aside. Then
loosen the air bleed valve. (It is not necessary
to remove air-bleed valve.)
1st Drain cap
2nd Air bleed valve
STOP
Wiper Handle
13
OR
STOP
Step 2
Drain the filter tank by first removing the drain
cap and then opening the air bleed valve.
TIP: A hose bib and garden hose can be con-
nected to allow drainage into a convenient
area.