Jacuzzi Avalanche, Руководство пользователя и инструкция по установке

Страница: 11 / 23

Cleaning the pump strainer:
To avail electrical shock, unplug the pump before performing
any service or maintenance.
If filter Ring-Lok is removed or adjusted under pressure, the
filter cover may blow off, causing injury or major property
damage.
Unplug the pump cord.
Step 1
For above-ground pools with the filter system located below the pool water level.
Your system is full of water. If you remove the pump strainer cover, water will run
out freely from your pool. You must close the shut-off valves, if installed, or make
provisions to stop the flow of water from your pool. To remove the water that is
still captured in your system, drain the filter tank before proceeding.
For in-ground pools with the filter system located above the pool water level.
Your system is full of water. If you remove the pump strainer cover before drain-
ing the filter tank, water in the filter tank will flow out of the pump freely and dirty
water may run back into your pool.
OR
Step 3
Unscrew the strainer RING-LOK nut and re-
move the clear strainer cover.
CAUTION: Some remaining water may spill
out of the strainer body when the clear
strainer cover is removed.
1st Drain cap
2nd Air bleed valve
STOP
11
STOP
Step 2
Drain the filter tank by first removing the
drain cap and then opening the air bleed
valve. Replace the drain cap once filter is
drained.
TIP: A hose bib and garden hose can be
connected to allow drainage into a conve-
nient area.