9
OWNER'S MANUAL
Figure 13. Remove the Cover
3. Pull gently on the elastic band around the suction
ports to release the filter bag (Figure 14).
Figure 14. Release the Elastic Band around Bag
4. Pull tabs to unfasten and turn the bag inside out
for thorough cleaning (Figure 15).
Figure 15. Turn Bag Inside Out
5. Using a hose with clean water, rinse the filter bag
to remove all debris (Figure 16).
Figure 16. Rinse
6. Replace back into the cleaner body and replace
the cover.
7. Store the cleaner out of direct sunlight for next use.
4.6
STORE THE CLEANER WHEN NOT
IN USE
Do not leave the cleaner in the pool when not in
use. The cleaner should be cleaned regularly using
slightly soapy clean water. Do not use solvents such
as trichlorethylene or its equivalent. Rinse the cleaner
generously using clean water. Do not let your cleaner
dry in direct sunlight near the pool.
1. Disconnect cleaner from the power source.
2. Start at the cleaner head, remove all coils and
tangles from the floating cable. Lay the cable in the
sun to loosen any tangling memory (Figure 17).
3. Disconnect the cable from the control unit.
Figure 17. Untangle the Floating Cable
4. Loosely coil the floating cable starting at the
cleaner and moving toward the connection point
at control unit.
5. Store the cleaner and power supply in a dry/
shaded area.
6. For extended periods, such as winter months,
store the cleaner in a box to keep motors, plastics
and seals protected (make sure the cleaner is dry
before storing) (Figure 18).
