background image

2

JACUZZI

®

 JAG ROBOTIC CLEANER

FCC STATEMENT

 

This device complies with Part 15 of the FCC Rules and IC licence-exempt RSS standard. Operation is subject to the following two 

conditions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation.

 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the following measures:

 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Any changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to 

operate the equipment. 

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development 

Canada's license-exempt RSS(s). Operation is subject to the following two conditions: 

 

 

(1) This device may not cause interference.  

 

(2) This device must accept any interference including interference that may cause undesired operation of the device.

THANK YOU FOR PURCHASING THIS ROBOTIC POOL CLEANER.

YOUR ROBOTIC CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED AND TO 

PROVIDE LOW MAINTENANCE OPERATION.  PRIOR TO INSTALLING YOUR NEW CLEANER, PLEASE DO THE 

FOLLOWING:

1) 

Record your purchase information on the spaces provided below.

2) 

Attach your invoice (or a copy) to this page.

Taking these steps will help ensure prompt service, should it be required. If service is required, please  

contact your original dealer. If the original dealer does not perform warranty service, please call our Technical Support 

department at 1-800-822-7933.

RECORD YOUR CLEANER DATA HERE:

Date of Purchase  

 Purchased From  

 

 Serial Number:  

 

   

   

    

 

   

(located on robot- head)

City 

    State/Province 

    Zip/Postal Code  

Содержание 63659













Отзывы: