32/64
working is free from impediments that might hinder
the operator.
• It is mandatory
to keep the blades and moving parts of
the Shears away from one’s face and any exposed persons.
• It is mandatory
to periodically clean the Shears following
the schedule and methods set out in this Instructions
Manual.
• It is mandatory
to disconnect the power cord of the
Shears from the supply battery prior to starting any
maintenance operation.
• It is mandatory
for the servicing and adjustments to
always be performed with the Shears disconnected from
the power supply.
• It is mandatory
to stop the Shears and inspect them in
the event any abnormal vibration should be observed or
have them inspected by personnel appointed by the man-
ufacturer until the causes are identified and eliminated.
• It is mandatory
to contact a dealer if the Shears stop
during operation or a component breaks.
• It is mandatory
to comply with the laws in force in the
country of installation on use and disposal of the prod-
ucts used for cleaning and performing maintenance on
the Shears, adhering to the recommendations of the
manufacturer of said products.
• It is mandatory
for maintenance on the Shears to only be
performed by skilled and specialized personnel, in strict
compliance with the instructions in this manual, and for
any worn or damaged parts to be replaced.
• It is mandatory
to always use original spare parts when
carrying out repairs and maintenance.
• It is mandatory
when work is completed to place the
Shears and relevant batteries in their case and store the
whole in a safe place protected from the weather.
DANGER!
It is recommended the Shears be used by
the same person for a short time during
the day, alternating one hour of work and
one hour of rest.
Continued use of the Shears may cause a
strong feeling of fatigue for the operator.
• It is recommended to familiarize yourself
with the control devices and their functions
prior to starting work.
The Shears has been designed and built in
accordance with current safety regulations.
Special maintenance (repairs) must only be
performed by qualified personnel and original
spare parts must be used.
2.7. Safe maintenance
In order to guarantee safe maintenance of the Shears it is nec-
essary to respect the following provisions:
• It is prohibited
to remove or tamper with the safety
devices.
• It is forbidden
to touch the battery charger while
charging. Danger of burns.
• It is mandatory
periodically check safety device integrity
and operation.
• It is mandatory
to periodically check (1 hour) the blade’s
cutting edge and if required to sharpen it with the wet-
stone supplied.
• Cutting performed with the blade not perfectly sharpened
decreases duration of the battery and increases the me-
chanical strain of cutting at the expense of performance
as well as integrity of the product
• It is mandatory
to periodically check the state of pres-
ervation of the power supply cord.
• It must
not
show any cuts or visible marks of abrasion,
otherwise replace it immediately.
• It is mandatory
to disconnect the power cord of the
Shears from the supply battery prior to performing any
cleaning, lubrication or maintenance operation.
• It is mandatory
to strictly perform maintenance on the
Shears according to the instructions in this manual and
replace the damaged or worn parts with original spare
parts only.
• It is mandatory
for maintenance on the Shears to only
be performed by skilled and specialized personnel, in
strict compliance with the instructions in this manual.
• It is mandatory
to always use original spare parts when
performing repairs and maintenance on the Shears. Using
non-original parts immediately renders the warranty null
and void and can compromise the durability and reliability
of the machine.
• The dangers are shown on the cover inside the case by
pictographs (decals). These signs must always be kept
clean and immediately replaced when removed, even
partially, or damaged: it is prohibited to operate the Shears
when even one of these signs is missing from the spot
where it was installed by the Manufacturer.
• It is mandatory
to save and keep this manual for the
entire life of the Shears.
3. Usage Instructions
Before starting to use the Shears it is mandatory to read and
perfectly understand the instructions contained below.
3.1. Transport
The Shears are delivered ready for use contained in a plastic
material case, which also houses the battery and the backpack
for transport and all accessories required for correct operation.
WARNING!
Prior to using the
Shears
the first time,
check integrity of the supply, comparing the
equipment with that shown in Figure 1 of this
Instructions Manual.
Содержание PR-40
Страница 21: ...21 64...
