30/120
12.1. Tool Kit
The tool kit provided with the sprayer is essential to carry out periodical maintenance repairs or adjustments.
12.2. Changing the oil
Drain the oil while the engine is still warm for a quick and complete draining.
a.
Place the sprayer on a level surface with the engine off.
b.
Check if the fuel tank cap is firmly tightened.
c.
Remove the oil filler cap and drain the oil into an oil container by tilting the engine towards the oil filler neck.
d.
Refill with recommended oil until the maximum fill line. Add engine oil slowly to avoid overfilling as the oil tank capacity is small.
OIL TANK CAPACITY: 100ml
e.
Install the oil filler cap safely. If any oil is spilled, make sure to clean it completely.
Wash your hands with soap and water after handling oil.
RECOMMENDATION
Observe environmental preservation laws and follow the instructions from the manufacturer when disposing of used engine oil. We
suggest the used oil is put in a container that can be sealed and taken to the closest recycling station. Do not throw used oil in the
sewage network, in water streams or on the ground.
3-mm Allen wrench
4-mm Allen wrench
17/10 wrench
Candle wrench
Oil filler neck
Maximum fill line
