Jacobsen Ransomes MP493, Руководство дилера

Страница: 33 / 104

en-33
MAINTENANCE AND LUBRICATION 5
5.4 ENGINE LUBRICATION_________________________________________________
Check Engine Oil Level
Check the engine oil level before you start or at least five
minutes after you stop the engine.
(a) Park the machine on a solid level surface, remove
the dipstick (A), clean with a cloth and replace in
position.
(b) Remove the dipstick (A) again and check the oil
level. The oil must be between the two level
indicators (B) on the dipstick.
Change the Engine Oil
(a) Start the engine to increase the temperature, then
turn off the engine. Remove the oil drain plug (C)
from the bottom of the crankcase.
(b) Drain engine oil into a container.
(c) Clean area around drain plug with a cloth. Replace
the drain plug (C) and fill the engine with the
correct quantity and grade of oil through the filler
(D).
Change Engine Oil Filter
(a) Remove the oil filter cartridge (E).
(b) Let the engine oil flow into a container.
(c) Clean the area around filter mounting.
(d) Apply a thin layer of oil to cartridge gasket before
you install the filter.
(e) The filter cartridge must be no more than hand tight
(E).
(f) Check for oil leaks around the cartridge gasket
after the engine is started.
CAUTION
Engine Oil Can Damage Your Skin. Use the applicable safety equipment. If Engine Oil Touches The
Skin, Clean The Area Immediately.
CAUTION
Discard Used Engine Oil As Shown In Local Regulations
A
B
F
D
E
C