Jacobsen Ransomes HR 6010, Руководство по эксплуатации, Страница: 63 / 76

CUTTER DECK ADJUSTMENTS
BLADE SHARPENING & REMOVAL
When required, the cutter blades may be
sharpened either by filing or grinding. It is
essential that the balance of the blades are
maintained.
NOTE: Always replace blades with original
Ransomes blades, do not use another manu-
facturers blades.
– Service the blades with the tractor turned
off, and the decks securely supported.
– Do not overheat or weaken the blades.
– If blade becomes cracked or bent, replace
with a new blade to ensure safe operation
– f lift portion of blade is worn thin replace
with a new blade to ensure safe operation
– Place block of wood W between blade and
deck baffle to prevent blade from turning
during removal
– Keep hands clear of rotating blades
Removing Blades
1. Remove the nut N from the top of the
blade spindle bolt
2. Remove the blade spindle bolt with the
washer and blade.
3. Replace the blade, washer and blade
spindle bolt.
4. Tighten to 100-140 ft-lbs (135-190 N-M)