Jacobsen Ransomes HR 6010, Руководство по эксплуатации

Страница: 10 / 76

STARTER KEY SWITCH
The starter key (A) should be turned clockwise to
the 'pre-heat' (No. 2) position to heat the glowplugs
when the green warning lamp goes out, on warning
lamp display module, turn the starter key clockwise
to the 'start' (No. 3) position to start the engine.
After starting, the key should be released and
allowed to return automatically to the 'on' (No. 1)
position for normal running.
THROTTLE CONTROL LEVER
The lever (B) should be moved away from the
operator to increase the engine speed and
towards the operator to decrease the engine
speed.
NOTE: Engine should be used at full speed.
STEERING WHEEL RAKE ADJUSTMENT
The steering wheel is adjustable for rake. The
clamping release knob (A) is situated on the
side of the control console on the left hand
side. To adjust turn the clamping knob
anticlockwise to release and pivot the steering
wheel backwards and forwards to obtain
desired setting then lock in position by turning
clamping knob clockwise.
TRACTION FOOT PEDAL
To move the machine forward press the front
of the foot pedal (A). To reverse depress the
rear of the foot pedal. When the pedal is
released it will return to its neutral position.
SPEED LIMITER
The speed limiter (B) is operated by sliding the
black knob to the right or left. When slid to the
right the machine is limited to cutting speed,
when slid to the left, transport speed is
available. In transport mode, reverse is not
available.
IMPORTANT: To enable mow engage the speed limiter must be
in the cutting speed position. If cutting units are rotating,
moving the speed limiter between the mow and transport
positions will engage and disengage cylinder rotation.
A
A
B
A
B
Controls