20
Replace oil cooler, by reversing step four from above.
(See Figure 1)
Install
floor shield (G) on tractor. Insert prop rod into hole in frame to hold oil cooler in its
regular position (D) at bottom of cooler and position hydraulic line to the front of
it. Swing cooler up and toward radiator as shown (E). Slide screen (B) in front of
oil cooler. Fasten knobs (C) located on top of oil cooler, and insert plastic shield
(F) in front of oil cooler. Attach end cap (A) from left side of cooler.
Figure One
——————————————————————————————————
Finishing cab installation.
Fit pre-cut foot platform floor mat (43) onto foot
platform, and seat platform floor mats to seat platform. If necessary, trim floor
mats to provide close fit to tanks, front of seat assembly, steering tower and front
cab frame members. When fit of floor mat is satisfactory, remove floor mat, apply
adhesive to underside of floor mat and reinstall. Use sealer to seal seams in floor
mat and between floor mat and tanks, and wherever edges of floor mat meets
seat platform, tanks or cab frame. (See Figure Twenty-eight). Reinstall door, right
front window and side windows by reversing the steps described in “Removing
door and wi ndows”.
Figure Twenty-eight
——————————————————————————————————
