Jacobsen Greens King IV Plus Скачать руководство пользователя страница 7

Страница: 7 / 118

SAFETY 2

2.2

IMPORTANT SAFETY NOTES ________________________________________________

This safety alert symbol is used to alert you to potential hazards.

DANGER

- Indicates an imminently hazardous situation which, if not avoided,

WILL

result in death or serious injury.

WARNING

- Indicates a potentially hazardous situation which, if not avoided,

COULD

result in death or serious

injury.

CAUTION

- Indicates a potentially hazardous situation which, if not avoided,

MAY

result in minor or moderate injury

and property damage. It may also be used to alert against unsafe practices.

NOTICE

- Indicates a potentially hazardous situation which, if not avoided,

MAY

result in property damage. It may

also be used to alert against unsafe practices.

For pictorial clarity, some illustrations in this manual may show shields, guards or plates open, or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place.

By following all instructions in this manual, you will prolong the life of your machine and maintain its maximum

efficiency. Adjustments and maintenance should always be performed by a qualified technician.

If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the

latest methods to service this equipment and can provide prompt and efficient service.

WARNING

The Interlock System on this mower prevents the mower from starting unless

the parking brake is engaged, reel levers are off, and traction lever is in

Neutral. The system will stop the engine if the operator leaves the seat

without engaging the parking brake, setting the reel levers to off, and placing

traction lever in Neutral.

NEVER operate mower unless the Interlock System is working.

WARNING

1. Before leaving the operator’s position for any reason:

a. Return traction lever to Neutral.

b. Disengage all drives.

c. Lower all implements to the ground.

d. Engage parking brake.

e. Stop engine and remove the ignition key.

2. Keep hands, feet, and clothing away from moving parts. Wait for all

movement to stop before you clean, adjust, or service the machine.

3. Keep the area of operation clear of all bystanders and pets.
4. Never carry passengers.

Содержание Greens King IV Plus























































































































Результаты поиска

Содержание Greens King IV Plus

Отзывы:

Похожие инструкции для Greens King IV Plus

Бренды по названию

Популярные бренды

Jacobsen Greens King IV Plus, Руководство по безопасности, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Greens King IV Plus

Отзывы:

Похожие инструкции для Greens King IV Plus

Бренды по названию

Популярные бренды