Jacobs Douwe Egberts Professional Instant Omni, Руководство оператора

Страница: 7 / 90

12-2015 H0522EN00
5
• Do not attempt to fill several cups by
pressing the pot button. There is danger
of injuries.
• Only authorised and qualified person -
nel may clean, fill up and set the vending
machine.
• The vending machine may not be clea -
ned under a water jet and is not suitable
for installation on surfaces next to which
water jets are being used (e.g. for clea-
ning).
• Use only original spare parts.
• Observe the local regulations!
• Regular cleaning of the vending ma -
chine is necessary for functional and
hygienic reasons. When cleaning, take
care of sharp edges. There is danger of
injuries!
• To clean the cabinet only use cleaning
agents approved by the food industry.
• Clean the inside and outside of the
vending machine by using a damp cloth
and do not splash it.
• After cleaning, make sure that all
components are correctly reinstalled.
• Every machine is identified by its own
serial number indicated on the rating
plate attached at the rear of the vending
machine. This plate is the only one
acknowledged by the manufacturer as
identification of the machine. The
technical data of the vending machine
are given on the rating plate.
When the yellow special key is inserted
in the slot of the door switch,
the voltage is re-established to the
machine.
The door can be closed only after
removing the key from the door
switch.
If power is turned on, be careful not
to touch moving parts and electrical
components.
Door switch:
When the door is opened, a special
switch ensures that there is no access
to energized or moving parts.
Any operation requiring the machine
to be energized with the door
opened must be carried out exclusively
by qualified personnel informed
about the specific risks of
such situation.
The machine may be energized by
qualified personnel by inserting a
special yellow key into the door
switch.
Before starting any maintenance
operation requiring parts of the espresso
brewer unit to be removed,
the machine must always be
switched off.
By means of class 1 LEDs.
LEDSs are generally shielded by a
glass front or an aesthetic panel.
The light of LEDs may be noxious if
you directly look at it without these
panels.