Jacobs Douwe Egberts Professional Instant Omni, Руководство оператора

Страница: 76 / 90

74
12-2015 H0522EN00
PAYMENT SYSTEMS
You can decide which protocols to enable for the payment sys-
tems available and manage the relative functions..
Some parameters shared by several payment systems keep
the set point even if you change the type of system.
v
ALIDATor
I
mmEDIATE CHANgE
The amount relative to a selection is generally cashed after the
machine has sent the “Successful selection” signal.
If you enable this function, which is disabled by default, the
cash signal is sent at the start of the dispensing cycle.
The setup of this parameter is compulsory.
D
ECImAL PoINT PosITIoN
To set up the decimal point position, i.e.:
0 decimal point disabled
1 XXX.X (one decimal digit after the point)
2 XX.XX (two decimal digits after the point)
3 X.XXX (three decimal digits after the point).
b
ookINg TImE
To set up for the cash payment how long the machine displays
the residual credit necessary to dispense the selection (7 sec-
onds by default).
L
INE
/
vALuE AssoCIATIoN
When the display is positioned on the “LINE-VALUE ASSOC.”
function (line programming) of the “programming” menu, you
can vary the value of the 6 coin lines of the validator from A to F.
CrEDIT ProgrAmmINg
(
ovErPAy
)
You can decide whether:
-to cash the credit exceeding the selection amount after a well-
defined time interval in seconds (parameter “deleted 000”)
-to leave the credit exceeding the selection amount at disposal
for a subsequent selection (parameter “maintained”)