Jacob Jensen 50, Руководство пользователя

Страница: 19 / 23

35
h .1 . Setting ringer volume & ringer type
Ringer Volume
Key Map:
Audio Setting ringer volume
select the volume
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
. Press / to select ”Ringer Volume” and press
3. Press / to select the volume you want. (you
will hear a sample of each as you scroll through), then
press
to confirm.
4. Press to exit and return to standby. If you select
Volume ”Off”, will be displayed.
Ringer Type
Key Map:
Audio Setting ringer type
select the option select the ringer type
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
. Press / to select ”Ringer Type” and press
3. Press / to select the ”External”, ”Internal”,
”Paging”, ”Alarm”, or ”Appointment” and press to
confirm.
4. Press / to select the melody you want. (you
will hear a sample of each as you scroll through), then
press
to confirm your selection.
5. Press to exit and return to standby.
h .2 . Appointment
Key Map:
time & Alarm Set Appointm . – Select
your appointment
The date and time must be set before you can access the
Calendar menu option. To set date and time, see section
d .3 . Setting date/time . Your phone allows you to set five
personalized date and time appointments.
1. Press
to access the main menu.
. Press / to select ”Time & Alarm”. Press
3. Press / to select ”Set Appointm.”. Press
4. Press /
to select one from ”Appointment 1”
to ”Appointment 5”. Press
5. Press / to select ”On”. Press
6. Enter date and time for the appointment. Refer to d .3 .
Setting date/time . Press
7. Enter the appointment name using the keypad (up to 13
characters). Press
i . AdvAnCed operAtion
Special Attention!!
the following sections are only for users who are familiar
with electronics products . failure in following steps correctly
may stop your deCt phone from normal operation .
i .1 . to register a cordless handset
When you register a cordless handset to your base, you will
be asked to enter your base PIN code. To enable registration
mode on the base unit, press and hold the PAGE button for
five seconds. The LED on the base will flash one time when
registration mode is enabled. Before registration, make sure
the new handset is fully charged and that you have the base
and the handset in front of you. Also, make sure that all
handsets and the base are in standby.
On the handset you want to register:
Key Map:
Add . Settings register select
the base number
1. Press to access the main menu.
. Press / to select ”Add. Settings” and press
3. Press / to display ”Register” and press
to confirm.
4. Press / to select your base number and press
to confirm.
If the base already has the maximum number of six handsets
registered, you will need to deregister one of the existing
handsets before you can register the new handset. See
section
i .2 . deregister a handset or a base .