Jackson DynaTemp NB, Руководство по обслуживанию, Страница: 43 / 68

36
07610-004-29-29-A
PARTS
INCOMING/OUTLET PLUMBING ASSEMBLY
ITEM QTY DESCRIPTION PART NUMBER
1 3 Elbow, 90 Degree 1/2 Street Brass 04730-206-08-00
2 2 Nipple, 1/2" x 6" Long Brass 04730-003-62-38
3 1 Y-Strainer 04730-217-01-10
4 2 Nipple, 1/2" x 2" Long 04730-207-19-00
5 3 Bushing, Hex 3/4"M to 1/2"F Brass 04730-002-56-27
6 1 Solenoid Valve, 3/4" 04810-100-03-18
7 3 Nipple, 1/2 Close Brass 04730-207-15-00
8 1 Union, 1/2" x 1/2" Brass 04730-003-62-44
9 2 Tee 04730-002-22-56
10 1 Plug 04730-209-01-00
11 1 Elbow, 3/4 Street Brass 90 Degrees 04730-206-04-34
12 2 Fitting, 1/2" Male Swivel Brass 04730-004-19-62
13 1 VAC BRKR 1/2 Brass 04820-003-06-13
14 1 Pressure Transducer 05945-004-17-01
15 1 Harness 05999-004-21-58
16 2 Adapter, Omega HT 05700-002-29-75
17 3 Plug, 1/8 NPT Brass 04730-209-07-37
18 1 Injector, Rinse Manifold 09515-004-22-73
19 2 Screw, 1/4-20 x 1 05305-011-81-58
20 1 Gasket, Rinse Manifold 05330-003-75-91
21 1 Fitting, Thermostat Brass 05700-011-73-73
22 1 Probe, Thermister 06685-004-34-58
23 1 Red Hose, 1/2" x 28" 05700-004-31-55
24 1 Tee, 1/2 Brass 04730-211-27-00
25 1 Fitting, Comp. 1/2" NPT x 1/4" Tube OD 04730-004-36-38
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely affect the performance of the DynaTemp dishmachine. It is strongly
recommended that teflon thread tape—used in conservative amounts—be applied to threads when joining components
together. It is not advised to use thread sealing compounds, sometimes referred to as “pipe dope.” Compounds can be
ejected from the threads during the tightening process and become lodged in key components, rendering them useless,
including solenoid valves and pressure gauge isolation ball valves.
NOTICE