Jackson DishStar HT Скачать руководство пользователя страница 16

Страница: 16 / 68

07610-004-37-13-E

PROGRAMMING

CHEMICAL

FEEDER PUMPS

To access the programming mode, the machine must be ON and idle (between

cycles).

On the timer board, press and hold both the MOVE and ENTER buttons on the timer

board simultaneously for two seconds.

The PROGRAM (PGM) light and light A will illuminate.

NOTE: Once in the programming mode, the MOVE button is used to scroll between

the programming categories and the ENTER button is used to select the category.

Press the MOVE button to move the solid light to the desired location of FILL, RINSE
AID, DETERGENT, or SANITIZER. Please note that options A, B, C, and D are not

adjustable outputs.

Press the ENTER button for the chosen category. Now, the (PGM) light will illuminate

along with lights corresponding to the time values for the chosen category. The

ACCEPT light will blink.

The PROGRAM light will illuminate.

INSTRUCTIONS

INSTALLATION

LT/LT-H

•

Detergent, Rinse-aid, and Sanitizer - hold each priming switch until the
respective chemical can be seen entering the wash tank.

4. Detergent is dispensed as required during the wash cycle by the timer. The

amount of detergent might need to be increased or decreased depending upon
water quality and type of detergent.

Rinse-aid is dispensed as required into the final rinse. The amount of rinse-aid

might need to be adjusted depending upon water hardness and results.

Sanitizer is dispensed proportionally into the final rinse water line. The amount

of sanitizer might need to be adjusted depending on concentration.

Please refer to the instructions below on adjusting the chemical feeder

pumps

on the universal timer.

PRIMING CHEMICAL

FEEDER PUMPS

Содержание DishStar HT





































































Результаты поиска

Содержание DishStar HT

Отзывы:

Похожие инструкции для DishStar HT

Бренды по названию

Популярные бренды

Jackson DishStar HT, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание DishStar HT

Отзывы:

Похожие инструкции для DishStar HT

Бренды по названию

Популярные бренды