manualshive.com logo in svg

Jackson CONSERVER XL2C, Инструкция по установке, эксплуатации и обслуживанию, Страница: 30 / 54

Поделиться
Скачать
Jackson CONSERVER XL2C Скачать руководство пользователя страница 30

07610-002-10-23-V

23

OBSERVATION

POSSIBLE CAUSE

REMEDY

Dishmachine will not run, 

no voltage at wash relay 

terminals L1 and T1. 

1. Service disconnect switch 

    off or faulty.
2. Branch circuit breaker 

    tripped/fuse blown.
3. Loose or broken connection 

    to dishmachine.

1. Turn disconnect on.
2. Reset or replace.

3. Tighten or replace connections.

Machine will not run in "ON" 

position unless cam timer 

is moved off the "home" 

position.

1. Door switch shorted out. 
2. Faulty control relay.

3. Faulty "cycle reset" 

    microswitch in cam timer.

1. With the door open, check for voltage between   

    ORANGE/WHITE door switch and neutral. If 120 V, 

    replace the door switch.
2. With the door open, check for voltage between connections #9 

    and #3 on control relay. If 120 V, replace control relay.
3. Replace microswitch.

Machine will not run in "ON" 

position but works in Delime 

mode.

1. Faulty cycle reset cam 

    microswitch. 
2. Faulty cam timer motor. 

3. Faulty control relay. 
4. Faulty NORMAL/DELIME 

    switch. 

1. With the switch in the Normal position, rotate the cams 

    manually off the home position. Check the voltage between the 

    ORANGE and BLACK/WHITE wires on the cycle reset switch. 

    If it is 120 V, then the switch is open and should be replaced.
2. If cam timer is not rotating, check the voltage to the motor. If 

    voltage is present when the door is closed, replace the motor.

3. Check the voltage across contacts #9 and #6. If 120 V when 

    the door is closed, replace the relay.

4. In the NORMAL position, check the voltage between WHITE/

    BLACK and WHITE/RED wires to switch. If 120 V, replace the 

    switch.

Machine will not run. Wash 

pump motor will run if wash 

relay is depressed manually 

(nothing else works).

1.  Open door switch.  
2.  Faulty control relay.  

1. With door closed, measure voltage between BLUE and 

    WHITE/BLACK wires on terminals #6 and #9 of the relay. 

    If 120 V, replace the relay.
2. Measure between the BLACK wires on terminals #6 and #9 

    of the relay. If 120 V, replace the relay.  Measure between the 

    WHITE/ BLACK wire on terminal 4 and the ORANGE/WHITE 

    wire on terminal 7 of the relay. If 120 V, replace relay.

Machine will not run in “ON” 

position or in Delime mode. 

1. Door switch is defective.

2. Faulty OFF/ON/FILL switch.
3. Faulty NORMAL/DELIME 

    switch.

1. With door open, check for voltage between ORANGE/WHITE 

    door switch and neutral. If 120 V, replace the door switch. 
2. With switch ON, check voltage between BLACK 

and WHITE/

    BLACK wires to switch. Replace the switch if 120 V.

3. In the NORMAL position, check the voltage between 

    WHITE/BLACK and WHITE/RED wires to switch. 

    If 120 V, replace the switch.

Machine cycles continuously. 1.  Cycle reset switch loose.  

2.  Faulty cycle reset switch.

1. Reposition switch assembly, bend metal lever if necessary.

2. Measure between BLACK/YELLOW and ORANGE wires on 

    "cycle reset" switch while timer is rotating. As the switch lever 

    drops into home position you should measure 120 V. If not, 

    adjust or replace the switch.

Machine fills continuously 

even with no power 

applied to the machine. 

1. Incorrect pressure.
2. Water inlet solenoid valve 

    allowing water into machine.

1. Check water pressure during fill, pressure must 

    be 15 PSI.
2. Repair or replace water inlet solenoid valve. 

TROUBLESHOOTING

TROUBLESHOOTING

Содержание CONSERVER XL2C























































Отзывы:

Нет отзывов