Jackson MSC 10AB-N70, Инструкция по установке и эксплуатации

Страница: 27 / 116

22
Page Created: 09-10-2012
Revised: N/A
Technical Manual (07610-003-97-40)
DELIME INSTRUCTIONS
To proceed with the delime operation, fill the dish-machine and the correct amount of delime solution
as recommended by the manufacturer of the chemicals. The tank capacities of the machine can be found on
the specifications page of this manual.
After the chemicals are added, perform the following steps:
1. Disconnect or turn off chemical feeder pumps.
2. Close the door.
3. Flip the WASH switch to ON, run machine for the length of time required by the chemical solution
manufacturer.
4. Flip the WASH switch to OFF
5. Open the door and step away for 5 minutes.
6. Inspect the inside of the unit to determine if your expectations have been met. If not, you may need
to run the delime solution through the unit for more time.
7. Once clean, drain the machine completely.
8. Close the door.
9. Refill the unit.
10. Flip the WASH switch to ON and run the unit for 10 minutes.
11. Flip the WASH switch to OFF.
12. Open the front door.
13. Drain the unit.
14. Your machine is ready to use.
This equipment is not recommended for use with deionized water or other aggressive fluids. Use of
deionized water or other aggressive fluids will result in corrosion and failure of materials and com-
ponents. Use of deionized water or other aggressive fluids will void the manufacturer’s warranty.