Jackson Labs Mini-JLT GNSS Скачать руководство пользователя | Manualshive

Страница: 14 / 62

background image

Mini-JLT™

User Manual

8

© 2017 Jackson Labs Technologies, Inc.

GPS, SBAS, BeiDou
GPS, SBAS, Galileo, GLONASS
BeiDou, GLONASS

However, the following is an example of a combination of GNSS systems that would require three
different carriers and is not supported:

GPS, SBAS, BeiDou, GLONASS

Attempting to configure an invalid combination of GNSS systems with the GPS:SYST:SEL
command will result in a Command Error response with no change to the configuration.

2.4 Connecting the GNSS Antenna

Connect the GNSS antenna to the SMA connector J4. Caution: use a Lightning Arrestor on your
Antenna setup. Use an amplified GPS antenna that is 5V LNA compatible. The Mini-JLT GNSS™
GNSS receiver is a 72 channel high-sensitivity multi-GNSS receiver with very fast lock time.

The Mini-JLT GNSS™ unit is set at the factory to use Position Hold mode, and will initiate an
Auto Survey process after power-on to establish its new position. The Auto Survey process may
last up to 3 hours. The units’ antenna should not be moved when set to Position Hold mode.
Please set the unit to mobile mode using the GPS:TMODE OFF command when the unit is to
be used in a mobile environment where the antenna position can change more than 1 foot
during operation.

The Mini-JLT GNSS™ is capable of generating standard navigation messages (see GPS:GPGGA,
GPS:GPZDA, GPS:PASHR, and GPS:GPRMC TTL serial commands) that are compatible with most
GPS based navigation software.
The GNSS receiver generates a 1PPS time signal that is phase synchronized to UTC. This 1PPS
signal is used to frequency-lock the 10MHz output of the Mini-JLT GNSS™ GPSDO to UTC, thus
disciplining the unit’s 10MHz frequency output to the US Naval master clock for very high
frequency accuracy (typically better than 10 digits of frequency accuracy when locked to GNSS
signals).

2.5 Remote serial control

The unit is controlled via the TTL or USB serial port at 115200 baud, 8N1. Other Baud Rates can be
set via SCPI commands.
Attach the Mini-JLT GNSS™ unit to your PC’s Hyperterminal, the Jackson Labs GPSCon software
package (see Chapter 5 of this manual), or a third-party freeware Windows-based application
program called Z38xx. The Z38xx program can be used to track the performance of the Mini-JLT™.
Z38xx is available on the Jackson Labs Technologies, Inc. website under the following URL:

http://www.jackson-labs.com/assets/uploads/main/Z38XX.zip

2.6 Loop parameter adjustment

All loop parameters can be controlled via either of the two serial ports.

«
...
12
13
14
15
16
...
»

Содержание Mini-JLT GNSS































































Отзывы:

Нет отзывов

Похожие инструкции для Mini-JLT GNSS

Бренд: Magnat Audio Страницы: 64

Бренд: Vemco Страницы: 2

Бренд: Vemco Страницы: 2

CQVD7700U - CAR A/V DVD NAV

Бренд: Panasonic Страницы: 133

TRIPP LITE Series

Бренд: Eaton Страницы: 16

Бренд: Renault Страницы: 384

ZR-4630 ZR-4630

Бренд: Niles Страницы: 82

ZR-4630 ZR-4630

Бренд: Niles Страницы: 82

Бренд: Cactus Страницы: 45

Бренд: Nexa Страницы: 41

Бренд: Advance Paris Страницы: 2

Бренд: DAAB Страницы: 8

Бренд: EZCast Pro Страницы: 33

Бренд: Muzak Страницы: 3

Бренд: PIKO Страницы: 16

Бренд: ESCORT REDi Страницы: 54

Бренд: Legacy Страницы: 8

AIR-EAGLE XLT 44P-8-ESTOP

Бренд: BWI Eagle Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды