Jackson Labs Mini-JLT GNSS Скачать руководство пользователя | Manualshive

Страница: 61 / 62

background image

© 2017 Jackson Labs Technologies, Inc.

55

Mini-JLT GNSS™

User Manual

Certification and

Warranty

6.1 Certification

Jackson Labs Technologies, Inc. certifies that this product met its published specifications at time of
shipment.

6.1.1 Warranty

This Jackson Labs Technologies, Inc. hardware product is warranted against defects in material and
workmanship for a period of 1 (one) year from date of delivery. During the warranty period Jackson
Labs Technologies, Inc. will, at its discretion, either repair or replace products that prove to be
defective. Jackson Labs Technologies, Inc. does not warrant that the operation for the software,
firmware, or hardware shall be uninterrupted or error free even if the product is operated within its
specifications.
For warranty service, this product must be returned to Jackson Labs Technologies, Inc. or a service
facility designated by Jackson Labs Technologies, Inc. Customer shall prepay shipping charges (and
shall pay all duties and taxes) for products returned to Jackson Labs Technologies, Inc. for warranty
service. Except for products returned to Customer from another country, Jackson Labs Technologies,
Inc. shall pay for return of products to Customer. If Jackson Labs Technologies, Inc. is unable, within
a reasonable time, to repair or replace any product to condition as warranted, the Customer shall be
entitled to a refund of the purchase price upon return of the product to Jackson Labs Technologies,
Inc.

6.1.2 Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance
by the Customer, Customer-supplied software or interfacing, unauthorized modification or misuse,
opening of the instruments enclosure or removal of the instruments panels, operation outside of the
environmental or electrical specifications for the product, or improper site preparation and
maintenance.

JACKSON LABS TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

«
...
59
60
61
62
»

Содержание Mini-JLT GNSS































































Отзывы:

Нет отзывов

Похожие инструкции для Mini-JLT GNSS

Бренд: Magnat Audio Страницы: 64

Бренд: Yaesu Страницы: 195

Бренд: Yaesu Страницы: 39

Бренд: Sealey Страницы: 3

Бренд: CEBEK Страницы: 2

Бренд: Maas Страницы: 72

Бренд: Strong Страницы: 20

AudioTroll 9400

Бренд: GES Страницы: 13

Бренд: Rotel Страницы: 24

Бренд: e+p Страницы: 12

Бренд: PS Engineering Страницы: 40

Бренд: AMG Страницы: 6

Бренд: CommRadio Страницы: 27

Бренд: Icom Страницы: 89

Therm RF Series

Бренд: Boss Страницы: 2

Бренд: Strong Страницы: 24

Бренд: Cobra Страницы: 8

Бренд: Cobra Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды