5
Control Panel
Please note:
You can switch temperature display setting from degrees
Fahrenheit to degrees Celsius by pressing and holding the UP button for 10
seconds. The temperature in degrees Fahrenheit or degrees Celsius will appear
in the temperature display window.
Installation
Remove the exterior and interior packaging. Use a soft dry cloth to wipe down the
outside of the Beverage Center thoroughly. Use a clean cloth dampened with
lukewarm water to wipe down the interior.
Air must circulate freely in front of the Beverage Center. Avoid placing it near any
source of heat or moisture, or in direct sunlight. Direct sunlight may affect the
finish, and nearby heat sources will cause higher electrical consumption.
The SC90OD Outdoor Beverage Center is designed to be either free-standing or
built-in. It has motorized fans at the back of the unit that direct compressor-
generated heat away from the compressor and through the front of the unit.
Keep the front vents unobstructed. If the unit is built-in, allow minimum clearances
of 1/4” at the sides, 1/2” at the back and 1” at the top.
Electrical Connection
Important! For your personal safety, this appliance must be properly
grounded.
In the event of an electrical short circuit, grounding reduces the risk of
shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding plug. The plug
must be inserted into an outlet that is properly grounded and installed. The ground
wire cannot be connected to a gas pipe, heating pipe, water pipe, telephone line
