Jackson Grills SC90OD Скачать руководство пользователя страница 2

 

IMPORTANT SAFEGUARDS 

 

Read all instructions before using this appliance. Use this appliance only for its 
intended purpose as described in this instruction manual. Always exercise basic 
safety precautions, as described below. After reading the instruction manual, 
store it in an accessible place where the user(s) of this product can easily find it. 
 
The purpose of these safety precautions is to ensure safe and correct use of the 
product to minimize risks that could cause serious damage and injury to you or 
others. The safety precautions are divided into WARNINGS and CAUTIONS. 
Cases where improper handling of the unit could lead to death or serious injury 
are listed under the WARNING heading. However, the cases listed under 
CAUTION could also lead to serious results. To ensure safety, adhere strictly to 
both types of safety precautions. 
 

 

 
1.  All repairs, disassembly and modifications should be performed only by 

qualified technicians. Attempting to perform these yourself could result in fire, 
malfunction and injury. 

2.  Never splash water directly onto the product or wash with water without 

unplugging as a short circuit could result. In a rainy environment, a water-proof 
covering is recommended. 

3.  Never put flammable or volatile substances into unit as explosion and fire 

could result. 

4.  Do not damage, modify, excessively bend, strain, twist or bundle the power 

cord. Also, placing heavy objects on the power cord or binding could damage 
the cord, possibly resulting in electrical shock or fire. 

5.  Use a dedicated wall outlet. Do not use an extension cord or multiple-outlet 

adaptor as this could result in electrical shock, overheating and fire. 

6.  Never use flammable spray cans or leave flammable substances near the unit. 

Sparks from electrical switches could result in explosion or fire. If a 
combustible gas is present near the appliance, turn off the source of the gas, 
then open the windows and doors to allow the gas to dissipate. To avoid an 
explosion, do not pull the plug or switch off the unit. 

7.  The electrical socket must have good grounding. The ground wire cannot be 

connected with a gas pipe, heating pipe, water pipe, telephone line or lightning 
rod. It cannot be replaced with the neutral wire of single-phase power. In 

Содержание SC90OD
















Отзывы: