9
Cleaning and Maintenance
Cleaning the Outside
Unplug your Beverage Center. Clean the outside with a cloth dampened in mild
soapy water. Dry thoroughly with a soft cloth. To clean the door gasket, use only
mild soapy water. Never use harsh cleansers or scouring pads to clean any part
of your unit.
Cleaning the Inside
Unplug your Beverage Center and remove its contents. Rinse the inside surfaces
with plain water and dry the chrome racks, basket and shelving. Avoid getting
excess water inside the machine since it will flow into the water trap near the
compressor and possibly overflow.
Defrosting the Unit
The unit uses an automatic defrost system in which the refrigerated surfaces of
the unit defrost automatically. Defrost water drains into a hole in the floor of the
storage compartment and is channeled into a drain pan located at the back of the
unit near the compressor. Heat transferred from the compressor evaporates any
water that has collected in the pan. Be sure the drain hole in the floor of the unit is
clear and unobstructed.
Changing the Light Bulb
The bulb can be replaced with any standard U-shaped, 2-pin compact fluorescent
bulb of 5, 7 or 9 watts.
Don’t use any unusual force to remove the old bulb. No tools should be
necessary.
Follow steps A through D in the diagram on the following page to remove the old
bulb:
