VERY IMPORTANT: DISCONNECTED THE TANK WHEN THIS GRILL IS NOT IN USE.
„
To disconnect L.P. gas tank:
1. Turn all the knobs off.
2. Turn the tank valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from tank valve by turning the quick coupling nut counterclockwise.
Install the protective cap back L.P. tank valve.
C
C
O
O
N
N
N
N
E
E
C
C
T
T
I
I
O
O
N
N
F
F
O
O
R
R
N
N
A
A
T
T
U
U
R
R
A
A
L
L
G
G
A
A
S
S
(
(
N
N
G
G
)
)
I
I
T
T
E
E
M
M
S
S
:
:
Your natural gas grill is factory built to operate using natural gas only. Never attempt to operate your
grill on gases other than the type specified on the grill rating plates.
Your grill operates at 7 inch water column pressure. Verify supply pressure with your local gas
company. If supply pressure is different than 7 inch, contact a certified plumber for assistance. Not
for use with LP gas.
„
Before connection:
The natural gas hose and assemble are supplied with this grill.
Hose and assembly are CSA listed for natural gas, manufacturer gas, mixed gas and for liquefied
petroleum and for LP Gas-Air mixtures on basis of 0.64 specific gravity for 1000 BTU
’s per cubic foot of
gas at 0.3 inch water column pressure drop. Only ANSI Z21.54 approved hoses should be used with
this grill.
The appliance and its individual shut off valve must be disconnected from the gas supply piping system
during any pressure testing on that system at test pressures in excess of 1/2 psi (3.5Kpa).
The appliance must be isolated from the gas supply piping system by closing its individual manual shut
off valve during any pressure testing of the gas supply piping system at test pressure equal to or less
than 1/2 psi (3.5Kpa).
！！！
WARNING
！！！
Do not use hard metal piping of any kind to connect this type of grill to natural gas
source. Use only hose specified by reputable dealer. Using hard metal piping or
convoluted metal tubing is an unsafe practice. Movement of the grill can cause
breakage of metal pipe.
！！！
DANGER
！！！
Connection should be made by a certified plumber. Supply the plumber with a copy
of these instructions. Incorrect connection can result in a gas leak with possibility
of fire.
„
Connect your grill to natural gas source:
1. Insert the inlet connection to grill cabinet from back of grill. Tighten it to gas manifold with wrench.
Make sure to put natural gas hose through U shape bracket.
16
Содержание Classic PG-50403SRL
Страница 6: ...EXPLODED VIEW 6 ...
Страница 11: ...5 6 7 8 9 10 11 ...
Страница 13: ...Step VI When the grill is in the location step on the brakes of the casters by foot for hold still 13 ...
