Jackson Grills Classic PG-50403SRL, Руководство по сборке, использованию и уходу

Страница: 10 / 27

Step III:
(This step is only available for ITEM# JCSCART-NG)
1. Take out the side burner valve from the square hole of right side panel.
2. Remove the packing materials. Use the hexagon wrench to unscrew
(don’t remove) the set
screw of control knob, and pull out the knob.
3. Unscrew two M4*6 screws from gas valve.
4. Unscrew the 4 screws on side burner bracket A & B which fix side burner.
5. Place side burner valve in back of side burner control panel.
6. Secure gas valve to panel using the M4*6 screws.
7. Make sure valve stem comes through large hole of the panel. Valve orifice should be in center
of burner tube.
8. Tighten the screws of side burner bracket A& B.
9. Beneath right side shelf, attach side burner igniter wire to valve electrode.
10. Press control knob onto valve stem, and tighten the set screw of knob.
1 2
3 4
10