Jack K4-D Series, Руководство пользователя

Страница: 19 / 37

5.错误码说明表 Error code description
错误
Error
code
内容
Reasons
对策
Solutions
E1
电机堵转
Motor
stuck
请转动手轮检查机头是否卡住或者干涩转动困难；请检查
电机插件是否松动或者脱落；请检查加工物料是否过厚，
电机因扭力不足而无法贯穿；请检查机器是否缺少润滑
油。
The motor run out of load capacity, please reduce
the load capacity for the motor and then restart the
motor;
Please check if the plug of motor loose or drop;
Please check if the sewing material is too heavy;
Please check if the machine needs lubrication.
E2
软件过流
software
over-curre
nt
请关电后重新上电，如果不能消除报警，请检查：电机负
荷过大，请减轻负荷后重启电机；Motor used too much,
Restart machine after several minutes, then please
check if the fabric much too heavy.
E3
参数保存异
常 出现此种状况，需要关闭电源，稍后再打开电源开关即可；
恢复出厂设置（长按 键约 3s 不松开）；
real voltage.
J4
历史电压 Historical
Voltage
显示历史输入最低电压和最高电压 Display
the historical lowest input voltage and
highest input voltage.
J5
历史错误代码 Historical
Error 显示最新的 5 个错误代码 Display historical
error code(only show the latest 5 ).
J6
累计运行时间
Cumulative Running
Time 显示的数×100=实际时间（Hour） the
showing number multiples by 10 equal
to the real time(hour).