Jack JK-T1790, Руководство пользователя, Страница: 143 / 185

19.2 上线切线调整模式
Performing needle thread trimmer adjustment mode
- 136 -
显示上线切线调整模式画面
Display the needle thread trimmer adjustment
mode screen.
按了检查程序画面的上线切线调整模式按键
(A)
之后，显示出上线切线调整模式画面
。
When NEEDLE THREAD TRIMMER
ADJUSTMENT MODE button (A) on the check program screen is pressed, the needle thread trimmer
adjustment mode screen is displayed.
A
上线切线调整
Perform the needle thread trimmer adjustment.
按了动作按键
(B)
之后，驱动切上线到
下列的位置，显示出 表示其位置的图
标。
C
：保持原位置
(
初期值：
0
脉冲
)
D
：开放位置
(
初期值：
-86
脉冲
)
E
：待机位置
(
初期值：
10
脉冲
)
F
：切线位置
(
初期值：
40
脉冲
)
When OPERATION button (B) is pressed,
the needle thread trimmer is actuated to the
positions below and the pictograph showing the
position is displayed in .
C : Thread holding position
(Initial value: 0 pulse)
D : Release position (Initial value: -86 pulses)
E : Waiting position (Initial value: 10 pulses)
F : Thread trimming position
(Initial value: 40 pulses)
用按键
(G
·
H)
，可以变更各个位置的数据。 按了原点检索按键
(I)
之后，从任何位置都可以检索原点。
按住按键
(K)
之后，剪线电机以单脉冲方式步进，可以模拟整个剪线过程，方便剪线功能的调试。按了返回按键
(J)
之后，把变更内容保存到机头
EEPROM
，返回到检查程序画面。
Data of the respective positions can be changedwith - or + button or (G or H). When ORIGIN RETRIEVAL
button (I) is Pressed , the origin retrieval can be performed from any position. When button
(K) is
pressed ,UT TRIM MORTOR work with single pulse way, you can simulate the cutting process, and make regulate to
the needle thread trimmer function conveniently. When CANCEL button (J) is pressed, the contents of change can be
memorized in EEPROM of the machine head and the screen returns to the check program screen.