星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
76
equal to "Total Number"
Solution: a. if you use processing statistics function, modify "Statistics Initial Value" or "Total
Number", to make "Statistics Initial Value" less than "Total Number".
b. If you don't use processing statistics function, you can click
to close the
processing statistics function directly. See Section 2.2.5 and User Setting section.
6
、
“Prompt : No U-Disk is detected”
Reason: U disk not inserted or U disk damaged
Solution: insert / reinsert U disk, or use an undamaged U disk
7
、
“Prompt: Fail to store files, quit?”
Reason: when copying files from U disk to memory, an error occurs, such as U disk was
pulled out
Solution: when U disk is transferring, please do not pull out U disk
8
、
“Prompt : A file is deleted by error”
Reason: when copying files from memory to U disk, an error occurs, such as U disk not
inserted or U disk damaged
Solution: insert U disk or replace an undamaged U disk
9
、
“Prompt : Out range, Please Restting”
Reason: a. Length and width dimension of processing file is too big exceeding the scope of
processing
b. Though the length and width dimension of processing file does not exceed the
scope of processing, the absolute coordinates exceed scope of processing (For
example, imported from a machine with large processing range first, files are
written to the absolute coordinates, and then exported to a machine with small
processing range)
Solution: a. Decrease the dimension of processing files
b. Use the processing file generated by upper computer software directly to import.
