星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
18
Chapter III File Management
File management is used for operations such as input, output, and deletion for U Disk
and memory files. System identifies processing files with .FLW and .HLW suffix only.
Processing files are created by attached PC graphics editing software, or generated using the
file collection function.
3.1 Memory File Management
In the main menu interface, press the
key to enter the file management
interface, into memory file management by default, as shown in figure:
The memory can store 999 processing files at most, the total size of no more than 256 M
(or 128 M) total storage space. It supports Chinese and English names display. It uses 8.3
naming rules, that is, the primary file name cannot be more than eight characters (not more
than four Chinese characters if Chinese characters); If more than that, it will take the first 6
characters of the file name plus ~1 (if the first 6 characters are the same, use ~2, ~3... in turn)
for display.
Click to select file, the selected file name will be changed into red, carry out operations
for the selected file according to the need.
Keys descriptions:
copy file: copies the currently selected file or the last file of
