4
5
• The juicer will not run if the unit is not properly assembled. The motor has
a built-in safety feature that will not allow the power to turn on unless the
Locking Bar is locked in place.
• Do not use outdoors.
• Be sure to turn switch to OFF position after each use of your juicer. Make
sure the motor stops completely before disassembling.
• Do not use the appliance if the rotating Filter is damaged.
* This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify or
force the plug in any way.
SAFETY FEATURES
The Power Juicer was designed with safety in mind.
We have added two important safety features:
the Automatic Shut Off and the Locking Bar.
Built-In Thermal Cut Off Switch/Automatic Shut Off
Unlike other juicers, the Power Juicer is equipped with a special feature that
automatically shuts off the motor should the unit become jammed or overheated
during the juicing process. Prior to shut down, you will most likely hear the juicer
get louder. This will indicate that something has caused the motor to strain. Should
this happen, simply turn the Power Switch off and unplug the unit… follow the
Disassembly, Cleaning and Assembly process, then allow the unit to cool for 10
minutes. The unit will restart and you may resume the juicing process. There are
some additional reasons that could cause a “shut down”. You can find them in the
trouble shooting section of your operating manual on page 19.
The Locking Bar
The Locking Bar holds the juicer Lid/Pulp Guard in place and is connected to
an auto shut-off switch. If the Locking Bar is not in its full upright and locked
position, the juicer will not start. This is to prevent accidental contact with the
spinning Blade. If the machine is not locked, the motor will not engage and the
Blade will not spin.
SAVE THESE INSTRUCTIONS
