8
9
Lip
2
Juice Spout
Base
Receptacle
ASSEMBLY
STEP 1:
Place Base on a dry, flat surface
with Locking Bar in “down” position.
Locking Bar should be to the left of
the machine with the Power Switch
facing you, as shown.
STEP 2:
Place Receptacle on the Base,
with Juicer Spout facing left just like
the Locking Bar. Seat Receptacle into
proper alignment.
1
Front
of Machine
Power Switch
Locking
Bar
Base
STEP 3:
Place Filter inside Receptacle, so that
the Screw Peg attached to the Base is
aligned with the hole in the bottom
of the Filter.
3
Filter
Receptacle
Screw Peg