19
TROUBLESHOOTING
• Check to see if unit is plugged in.
• Locking Bar is not locked in place properly.
• Check if all parts are assembled properly.
• Check if there is any residue left between Blade
and Receptacle.
• Check that all parts are assembled properly
and in the correct position.
• Juicing overripe fruit may result in too much
pulp and will clog the Filter. Turn machine off
and clean the Filter.
• You may have applied too much pressure with
the Pusher while processing causing the motor
to accidentally over heat. This activates the
built-in Thermal Cut Off Switch. The motor
will temporarily stop working for approximately
10 minutes to cool down. See additional
information on page 4.
• The motor needs to warm up for 5–10 seconds
before first use.
• The fruits and vegetables may be soft
or overripe.
• There may be too much pulp in the Filter.
Turn machine off and clean the Filter.
• Pulp Collector is full and needs to be emptied.
• Make sure the Juice Spout is in the downward
position while juicing. If it is in the upward
position the juice will not come out.
It will overflow from the sides of the receptacle.
The motor does not
run after being
switched on.
The motor is running
with a loud noise and
excessive vibration.
The motor overheats
causing the power
to automatically
shut off.
No juice is coming
out of the spout.
Problem
Possible Reasons and Solution
