JABO 2AG, Руководство пользователя, Страница: 11 / 14

11
2 The remote control must also maintain sufficient power.
3 When the battery voltage inside the boat is too low, two lights on the boat will flash at the same
time, indicating that the battery should be charged at this time, and the power indicator on the
remote controller will also prompt the battery to decrease. After each use, the ship's power switch
and remote control switch should be turned off.
4 JABO-2 series remote control boat is suitable for use in reservoirs, lakes and ponds. It cannot be
used on flowing water to avoid being washed away by currents. Not suitable for use in stormy
water. Cannot be used in seawater.
5 If during the fishing season, the interior of the hull should be kept dry and the battery plug
should be unplugged. The power battery should be charged every 2-3 months, and the lithium
battery power should be stored in the 70%-80% state.
6 Please lock the lid buckle before use. Cover switch waterproof cap.
7 The bait weight should not exceed 1.5kg.
8 It is forbidden to forcefully lift up the bait silo with external force. Otherwise it is very easy to
damage the drive mechanism.
9 It should be specifically stated that if the power switch of the remote controller is turned off first,
and the boat has left the water at this time, the motor on the boat will begin to rotate. This situation
is not a malfunction, but the boat is beginning to
“
return
”
. Is turning off the ship's power switch.
10 If you turn off the switch of the ship and then turn it on again, and the switch of the remote
control has not been turned off, there will be a phenomenon that the remote control cannot control
the ship. At this time, simply turning off the remote control switch and turning it on again can be
operated.
11 When using two or more remote controllers at the same time, it should not be surprising if two
remote controllers control the same boat at the same time. Just set the remote controller to a
different serial number.
Battery connection diagram:
1 Undo the hatch cover deduction 2 Connect the battery plug with 3 Note: The red line should be connected
the socket in the boat with the red line, the black line should be
connected with the black line
4. Locking hatch 5Turn on the power switch and both tail lights start to flash
。