background image

Alarm system JA-65 MAESTRO 

- 4 - 

MFM53003 

This product is  to be installed by professional installers only. 

The manufacturer assumes no liability for damages caused by 
incorrect installation or improper use of this system. 

 

 

1.  Architecture of the control panel 

 

The JA-65 "Maestro" is a fully programmable control panel with 
building block architecture.  This allows the JA-65 to be tailored 
to particular installation requirements. The Maestro can operate 
as a wireless, wired or combined system.  
The JA-65K  metal box has a built in electronic power supply. 
There is space for a 12V, 7Ah  back up battery.  The 16 zone 
control panel’s main board is installed in the internal platform. 
The main board does not have any physical zone inputs. This 
allows you to co figurate the control panel by using the following 
modules: 

• 

Radio communicating module JA-65R 

can enroll wireless 

items (JA-60): up to 16 detectors, up to 8 controllers 
(remote controls or wireless keypads), JA-60A  wireless 
sirens and UC family wireless output modules. 

• 

Hard-wired input module JA-65H 

has 8 input loops with 

programmable triggering (NC, balanced or double balanced) 

and programmable reactions. Up to two JA-65H  hard-wired 
input modules can be used in the control panel. 

• 

GSM dialer JA-60GSM

 sends SMS messages, calls to 

predefined telephone numbers and plays audible warning, 
communicates with 2 CMS, allows remote access from a 
phone’s keypad and can be set via web page. 

• 

Telephone communicator JA-65X

 can communicate with 

a Monitoring Station, send  voice messages and dial a 
numeric Pager. It can also communicate with a remote  PC 
(using ComLink SW and a JA-60U modem). 

• 

Operation and programming

 is possible via the JA-60E 

keypad (or by its wireless option, JA-60F). The control panel 
can also be operated by a RC-40, RC-22 or RC-60 remote 
control, by input loop or by a JA-60D wireless keypad. 
Operation and programming is also possible via a PC using 
ComLink SW. 

 
    This allows the JA-65 to operate as a wireless (16 detectors), 
wired (8 or 16 inputs) or combined system. An additional JA-63 
or JA-65 subsystem control panel can expand the system. The 
control panel can be split in to two independent sections with a 
shared common area.

  

 

 

 

Содержание MAESTRO JA-65


















Отзывы: