jablotron JA-63 PROFI", Руководство пользователя

Страница: 13 / 16

F5 = storing of the sequence to memory 5 (32 digits can be
stored to memory 5 as a maximum - separators F9 and
F7 takes only 1 digit each).
How the SMS server woks: when activated, the control panel dials the SMS
server. After the connection is established, it sends the telephone number of the
mobile phone, to which the SMS should be sent. Then the control panel specifies
what happened by a digital code and in the end the ID number is transferred (if
programmed). In this moment the SMS server makes the corresponding text
message and this message is sent to the GSM network.
Example: If SMS server number is 483559876, SMS should be sent to number
606123456 and ID number of the installation is 41 enter :
7 483559876 F9 606123456 F7 00F9 F7 41 F5
Deleting of automatic SMS sending – enter: 7 F0 F5
Note: memory 5 can also be used to dial a Pager instead of SMS sending. Enter
7 xx..x F9 zzz....z F5 where xx..x is number of the provider, zz…z is number of
the pager and code of the message (check with a local Pager provider for details).
Pause in the dialing can be entered with F0,
∗
with F7 and
#
with F8. Pager dialing
can be deleted with 7 F0 F5.
To
exit user mode press N .
5 System testing
The supervisor should test the system monthly. For testing the control panel
should be in the user mode. Enter F0 master code to switch to the user mode ( U
will be indicated on the keypad)..
No alarm can be triggered while in the user mode and any triggering of a
detector, a remote control or a panic button will be indicated on the keypad.
Note: some detectors (for example the wireless motion detector) in normal mode can not
send the next triggering information until 5 minutes after the previous triggering was sent.
It is possible to switch such a detector to the testing mode by opening and closing its cover.
See the particular product manual for more details.
If anything does not work during testing, call the installer.
To exit user mode press N .
6 Battery replacement
All the battery-powered items perform regular battery testing. If the lifetime of the
battery is near the end, the system will indicate the need for battery replacement
(Battery indicator and the item address will be shown on the keypad).
When any detector or keypad asks for new batteries, they should be replaced in
a week. To replace batteries either call the installer or do the following:
Alarm system JA-63 „PROFI“ - 13 - MGK51501