jablotron JA-10 Series, Руководство пользователя

Страница: 5 / 24

3 1. INTRODUCTION
Thank you for choosing the JA-10 security system. This manual is
intended for the set of the JA-14K control panel and JA-10E or JA-15E
keypads. This system is a unique indoor solution for commercial, home and
personnel security which offers the use of wireless and wired devices.
The JA-10 is very easy to control. Simplicity of control consists of two steps,
authorization with a code or an RFID tag followed by pressing an individual
function button on a keypad. The alarm system can be also controlled just
by authorization. The JA-10 offers a wide range of detectors with timeless
design and can be operated from anywhere owing to complete remote
control access via our application for smart phones.
The JA-10 system is designed for up to 16 users and it can be divided into
4 separate sections. Up to 32 devices can be connected and the system
offers 4 multi-purpose programmable outputs (e.g. home automation).
WARNING:
The JA-10 alarm system is intended to be installed and programmed by
professionals. A user can only administrate user functions and access rights
to the alarm system.
The alarm system can be programmed to utilize various ways of control which are selectable during
installation as system profi les such as:
o Default Jablotron
o EN 50131, gr.2
Some of the user functions will be limited depending on the selected profi le. Request a detailed function
list from your service technician.
The alarm system can be controlled by a system keypad and a few other ways. To unset the alarm,
authorization in the form of user identifi cation is always required. The system detects the identity of the
users and allows them to operate those parts of the system which they have been assigned to control.
You can choose from different ways of setting with or without authorization. When setting without
authorization is used, you don’t have to authorize yourself because it is possible to set the system just by
pressing a function button on a keypad. The control panel may be confi gured to be controlled simply by
authorization. The user name, date, and time are recorded and stored in the system‘s memory every time
the system is accessed. This information is available indefi nitely. Any user can also cancel a triggered alarm
(stop sounding sirens) just by authorization in any part of the system (depending on their access rights).
However, that does not automatically unset the system (unless the system’s default setting is changed).
Note: Depending on the confi guration of the installation and system settings, some of the options described
below may not be available. Consult the confi guration of the installation with your service technician.
WARNING: The alarm system monitors the number of incorrectly typed user codes and use of
incorrect access cards. A tamper alarm will be triggered after 10 incorrect attempts at authorization
and the control panel will be temporarily blocked depending on the alarm system confi guration
(a selected system profi le).
2. OPERATING THE JA-10 SYSTEM