JABLOTRON
ALARMS
a.s.
Pod
Skalkou
4567/33
46601
Jablonec
n.
Nisou
Czech
Republic
www
.jablotron.com
||
|
The JA-150TP Wireless indoor thermostat
The JA-150TP Wireless indoor thermostat
3 / 3
MMX53105
For description of every single option see the chapter called
Setting
the thermostat properties in MyCOMPANY
.
In
Settings
Æ
Temperatures
for a selected thermostat the higher
and lower limits and the time period in which the temperature
is monitored can be set. When the temperature overshoots
or undershoots the pre-set limit, a notification is sent by SMS, e-mail
or as a PUSH notification for the smart application.
Battery replacement
The system reports if the batteries are nearly drained by a battery
symbol (11) on its LCD display. The system doesn´t have to be
switched to Service mode to replace the batteries because there
is no tamper contact.
Always use batteries of the same type and the same supplier and
always replace both of them.
FW upgrade
The thermostat supports wireless firmware upgrading. It can
be performed by
F-Link
software in
Service
mode.
1. Go to
F-Link: Control panel
–
Update firmware
. In the offered
list the JA-150TP should appear. If the F-Link SW detects
the existence of newer firmware than that in the thermostat,
it is automatically checked (ticked) for upgrading.
2. Press the OK button to perform the update of the selected
devices.
3. When the update is finished, check the internal settings
of the thermostat on the
Devices tab – Internal settings
.
4. Test the thermostat’s functions.
Technical specifications
Power
2x AA 1.5 V (LR6) alkaline batteries
Caution: batteries are not included
Typical battery lifetime
approx. 2 years
Communication frequency
868.1 MHz, Jablotron protocol
Communication range
aprox. 300 m (open area)
Dimensions
66 x 90 x 22 mm
Weight
60 g
Operational temperature range
-10 to +70 °C
Measuring range
-10 to +70 °C
Temperature regulator class
I. (according to (EU) no. 813/2013)
Contribution of regulator to seasonal efficiency
6 DFFRUGLQJWR(8QR
Operational environment according to
EN 50131-1 II. Indoor general
Temperature measuring sensitivity
±0.1 °C
Also complies with
ETSI EN 300 220, EN60950-1
EN 50130-4, EN 55022
Can be operated according to
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the JA-150TP is in a
compliance with the relevant Union harmonisation legislation: Directives
No: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2009/125/ES, 2011/65/EU.
The original of the conformity assessment can be found at
www.jablotron.com - Section Downloads.
Note:
Although this product does not contain any harmful materials
we suggest you return the product to the dealer or directly to the
producer after use.
