Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 48 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
4.5.14 Oil Return Manifolds
Figure 56
– Oil Return Manifolds
4.5.15 Roller Follower Locking Plate
Figure 57
– Crankcase & Locking Plate
Where equipped, oil return manifolds (Figure 56) are
removed by removing the two retaining cap screws.
Remove all O-rings from the manifolds.
Where equipped, remove the
roller follower locking plates
from the crankcases.
Locking Plate
Locking plate slot in case