JDN Air Hoists are designed in accordance with current
technological standards and accepted safety practice.
Nonetheless, the use of an air hoist may be associated
with risk of injury or fatality to the user or to third
parties or with the risk of damage to the hoist or to
other items.
All personnel charged with operating air hoists, must
have read and understood the operation manual, especi-
ally the section concerning safety instructions, before
commencing work. This is particularly important for
personnel who only occasionally operate the hoist,
e.g. for maintenance or retrofitting work.
Operators of JDN Air Hoists are also under obligation
to ensure safe and hazard-free operation. This can be
achieved through the following measures:
the operation manual must always be kept available
at the hoist operating site,
performing regular training,
implement an inspection log and make regular entries,
and regularly check personnel for safety and hazard
awareness during work.
Personnel who operate, maintain, inspect and perform
setting-up work on the hoist must be properly trained
or must receive an introduction from properly trained
personnel, before commencing work.
Due to their technical training and experience, properly
trained personnel have adequate knowledge of hoists.
They are sufficiently familiar with the relevant occupa-
tional safety and accident prevention regulations, that
they are able to assess the condition of hoists, with
regard to working safety.
Follow the operating instructions for your workplace.
Observe the accident prevention regulations,
especially BGV D8 (Winches, Lifting and Pulling
Devices) and VBG 9a (Load-carrying Devices used with
Lifting Equipment).
Ensure that you are properly informed regarding
working with hazardous materials.
Follow the safety instructions set out in this
operation manual.
Operators of JDN Air Hoists are under obligation to
ensure that entries in the accompanying inspection log
are made properly and regularly.
Comply with the prescribed maintenance intervals.
Only use JDN Air Hoists for work which is described
as intended use.
Observe the operating conditions for hoists as
described in this manual.
P R E V E N T I N G P R O P E R T Y DA M AG E
P E R S O N N E L S A F E T Y
O RG A N I S AT I O N A L M E A S U R E S
S A F E T Y I N S T R U C T I O N S
S A F E T Y I N S T R U C T I O N S
Page 5
Содержание PROFI 10 Ti
Страница 1: ...J D N O P E R A T I O N M A N U A L A I R H O I S T S 16 10 6 3...
Страница 58: ...NOTES Page 58...